This sweet amigurumi set features a cream-colored bunny in sage green overalls paired with a matching baby rattle on a wooden teething ring. Both pieces use tight single crochet stitches in a neutral palette with soft mint accents. Here is the complete pattern to make this nursery-ready gift set.
Materials Needed
Yarn (Sport Weight, #2):
- Cream or beige: 80g
- Sage green: 40g
- Grey: 10g (rattle ear inners)
- Pink: scrap for nose and cheeks
Tools and Notions:
- 2.5mm crochet hook
- 6mm black safety eyes (2 pairs)
- Polyester fiberfill
- Yarn needle
- Stitch marker
- 55mm wooden teething ring
- Two 8mm wooden buttons
- Black embroidery thread
Abbreviations
- ch: chain
- sc: single crochet
- inc: increase (2 sc in same stitch)
- dec: invisible decrease
- sl st: slip stitch
- rnd: round
- st(s): stitch(es)
Gauge and Finished Measurements
Gauge: 6 sc x 6 rows = 1 inch with 2.5mm hook
Finished bunny: approximately 9 inches tall (including ears)
Finished rattle: approximately 4 inches tall on ring
Bunny Pattern
Head
Work in continuous rounds. Mark first stitch of each round.
Rnd 1: Magic ring, 6 sc (6)
Rnd 2: Inc in each st (12)
Rnd 3: (Sc 1, inc) x 6 (18)
Rnd 4: (Sc 2, inc) x 6 (24)
Rnd 5: (Sc 3, inc) x 6 (30)
Rnd 6: (Sc 4, inc) x 6 (36)
Rnd 7: (Sc 5, inc) x 6 (42)
Rnds 8 to 15: Sc in each st (42)
Insert safety eyes between rounds 11 and 12, spaced 8 stitches apart.
Rnd 16: (Sc 5, dec) x 6 (36)
Rnd 17: (Sc 4, dec) x 6 (30)
Rnd 18: (Sc 3, dec) x 6 (24)
Stuff head firmly.
Rnd 19: (Sc 2, dec) x 6 (18)
Rnd 20: (Sc 1, dec) x 6 (12)
Rnd 21: Dec x 6 (6)
Fasten off and close hole.
Body
Rnd 1: Magic ring, 6 sc (6)
Rnd 2: Inc in each st (12)
Rnd 3: (Sc 1, inc) x 6 (18)
Rnd 4: (Sc 2, inc) x 6 (24)
Rnds 5 to 12: Sc in each st (24)
Rnd 13: (Sc 2, dec) x 6 (18)
Stuff body firmly. Fasten off, leaving long tail for sewing.
Ears (Make 2)
Rnd 1: Magic ring, 6 sc (6)
Rnd 2: (Sc 1, inc) x 3 (9)
Rnd 3: (Sc 2, inc) x 3 (12)
Rnds 4 to 6: Sc in each st (12)
Rnd 7: (Sc 3, inc) x 3 (15)
Rnds 8 to 14: Sc in each st (15)
Do not stuff. Flatten and sew to top of head.
Arms (Make 2)
Rnd 1: Magic ring, 6 sc (6)
Rnd 2: Inc in each st (12)
Rnds 3 to 10: Sc in each st (12)
Stuff lightly at hand area only. Fasten off, leaving tail for sewing.
Legs (Make 2)
Rnd 1: Magic ring, 6 sc (6)
Rnd 2: Inc in each st (12)
Rnd 3: (Sc 1, inc) x 6 (18)
Rnds 4 to 6: Sc in each st (18)
Rnd 7: (Sc 1, dec) x 6 (12)
Rnds 8 to 14: Sc in each st (12)
Stuff foot firmly, leg lightly. Leave open for attaching to overalls.
Overalls (Sage Green)
Shorts:
Rnd 1: Ch 30, join to form ring, sc in each ch (30)
Rnds 2 to 8: Sc in each st (30)
Divide for leg openings:
First leg: Sc 15, skip remaining 15 sts, join (15)
Rnds 9 to 11: Sc in each st (15)
Fasten off.
Second leg: Join yarn at divide, sc 15 (15)
Rnds 9 to 11: Sc in each st (15)
Fasten off.
Bib:
Working from top edge of shorts front:
Row 1: Join yarn, sc 10 across center front (10)
Rows 2 to 6: Ch 1, turn, sc across (10)
Straps: Ch 20 from each top corner. Sew wooden buttons to front. Cross straps in back and secure.
Baby Rattle Pattern
Rattle Head
Rnd 1: Magic ring, 6 sc (6)
Rnd 2: Inc in each st (12)
Rnd 3: (Sc 1, inc) x 6 (18)
Rnd 4: (Sc 2, inc) x 6 (24)
Rnds 5 to 9: Sc in each st (24)
Insert safety eyes between rounds 6 and 7, spaced 5 stitches apart.
Rnd 10: (Sc 2, dec) x 6 (18)
Stuff firmly.
Rnd 11: (Sc 1, dec) x 6 (12)
Rnd 12: Dec x 6 (6)
Fasten off and close.
Rattle Ears (Make 2)
Outer ear (cream):
Rnd 1: Magic ring, 4 sc (4)
Rnd 2: Inc in each st (8)
Rnds 3 to 7: Sc in each st (8)
Inner ear (grey): Work same pattern. Place grey inside cream, sew together at edges. Flatten and sew to head.
Teething Ring Cover
Rnd 1: Sc 40 around wooden ring, join with sl st (40)
Do not fasten off. Continue directly onto ring to create attachment point for head. Sc 6 more stitches, then sew head securely to covered section.
Decorative Bow
Ch 25. Sc in second ch from hook and across (24). Fasten off. Tie into bow and attach at base of rattle head.
Assembly Instructions
Bunny:
- Sew head to body
- Insert legs into overall leg openings and sew in place
- Sew arms to sides at shoulder level
- Embroider eyebrows with black thread using straight stitches
- Embroider pink nose and rosy cheeks with satin stitch
Rattle:
- Embroider closed sleeping eyes with curved black stitches
- Attach bow to ring base
- Ensure all pieces are securely fastened for baby safety
Safety Tips
Pull test all pieces before giving to baby. Eyes must be firmly locked. Check stitches are tight with no gaps where small fingers could poke through. Wash teething ring before use.
This coordinating set makes a thoughtful baby shower gift. The bunny becomes a cherished toy while the rattle provides sensory stimulation during those early months. Happy crocheting!
Related Articles
- How to Crochet Stunning Floral Statement Earrings Step by Step
- Stunning Crochet Rose Bracelets: Free Pattern for Floral Jewelry
- Adorable Crochet Ladybug Baby Bonnet Pattern for Beginners
- Adorable Monster Hooded Baby Sweater Crochet Pattern Guide
- Adorable Crochet Lion Amigurumi Pattern for Beginners & Beyond
